Friday, 19 July 2013

Leak Detection

Leak Detection

From a leak on domestic water mains, hot water pipework or central heating pipework through to commercial water, oil and gas lines.

Leak detection in today’s world is an art, not a job…that’s why Leak detection specialists only employ the “Best” staff around!

Our leak detection engineers are fully trained and each van comes equipped with the latest state of the art equipment available on the market today.

Our leak detection engineers have undertaken works for many private customers, most of the major insurance companies and large corporate clients such as Ministry of Defence, National Health Service, British Aerospace and even for the MOD on the Falkland Islands.

With a company background like this, you as our customer can rest assured that you are getting the “Best” there are to locate your leakage no matter what the situation.

Many projects carried out by our qualified teams are where other leak detection companies have failed to locate the leakage and our engineers have managed to pinpoint the leakage to a very small area allowing the customer to get it repaired fast so they can get on with their daily business with minimal disruption.

The methods we employ are state of the art and even some of our methods are bespoke methods of leak detection, designed and perfected and employed solely by ourselves giving you total peace of mind that you are in good hands no matter what sort of leak you have.

Whether you have 20 meters of pipeline or 20 miles, our fully qualified leak detection engineers will pinpoint your leak quickly and accurately!

For any further information regarding our leak detection services check out our website at

Sunday, 7 July 2013

Thermography Inspection


Thermography Inspection

  • Thermogarphy Inspection on new buildings compliant with Part L of the building regulations and BS-EN 13187.

  • Thermography Inspection to detect air leakage that is causing heat loss from older buildings improving energy efficiency in your home or business.

Thermography Inspection scans detect temperature variations in the shell of the home or business, which helps determine whether air is leaking and heat is being lost. The most accurate thermography inspection device is a thermal imaging camera, which produces a 2-dimensional thermal picture of an area showing heat leakage. Thermography inspection is non-invasive and non-destructive: no walls, floors or ceilings need to be opened to perform the inspection.

Reducing the amount of air that leaks in and out of your home or business is a cost-effective way to cut heating and cooling costs, improve durability, increase comfort, and create a healthier indoor environment.
Air Tightness and Thermal Imaging testing are important quality control measures when building or renovating a house. Heat losses in buildings can account for up to 50% of the total energy consumption and comes from air leakage through chimneys, attics, wall vents and badly sealed windows / doors.

Adequate air exchange is essential for the occupants’ health and safety, but most buildings have a far higher rate of air exchange than is necessary. The root cause is often poor design and/or construction which allows air leakage from the outside to the inside of the building, or the opposite. The leakage pathway is often complex and, without thermal imaging, extremely difficult to visualize. This also allows the contractors to quickly identify and repair the problem areas to stop the energy loss immediately.

All new buildings must meet air tightness requirements of the Building Regulations. By reducing air leakage, you will obtain a better comfort in the building. The building can also be heated more efficiently to conserve energy and save money.
Poor or inadequate insulation, moisture, building envelope leaks, and substandard work are costly to residential and commercial building owners. A Thermography Inspection can help you quickly see where energy efficiency can be improved.

Air infiltration contributes about 10% of the heat loss in a typical house built in the late 20th Century. Airtightness testing is a requirement of Part L of the Building Regulations unfortunately it does not identify the location of the air leaks that are limiting the airtightness. Thermal imaging can clearly show these leaks in a depressurisation test provided that there is a temperature difference of at least 5 oC at the time of the test, so the two are complementary.
Thermal imaging is therefore a useful diagnostic tool in tests on new buildings, but it can also be used to detect air leakage that is causing heat loss from older buildings. Although a blower door is typically used to provide the pressurisation it is possible to use the effects of wind, which typically pressurises one side of a building that leads to air entry at low levels and exit at high levels in tall buildings.

Leak Detection Specialists Thermographers are certificated at all three levels by PCN, part of the British Institute of Non-Destructive Testing (BINDT). Our thermographers use their skill and experience to interpret thermal images and diagnose any anomalies in the construction, compliant with Part L of the building regulations and BS-EN 13187. Leak Detection Specialists use leading-edge infrared technology from FLIR to perform thermography inspections of homes and buildings to improve energy efficiency, thus leading to savings on energy costs.

For more information visit Thermography Inspection our website or call us Tel: 0844 809 4968 for a free no obligation thermography inspection quote.